Reference Guide

exchanged. In the following example, that type of port is referred to as a VLAN trunk port, but it is not necessary to
specifically identify to the Dell Networking operating system (FTOS) that the port is a trunk port.
Figure 42. Global GVRP Configuration Example
Basic GVRP configuration is a two-step process:
1. Enabling GVRP Globally
2. Enabling GVRP on a Layer 2 Interface
Related Configuration Tasks
• Configure GVRP Registration
• Configure a GARP Timer
Enabling GVRP Globally
To configure GVRP globally, use the following command.
• Enable GVRP for the entire switch.
CONFIGURATION mode
328