Reference Guide

– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port
information.
– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
– For a VLAN, enter the keyword vlan then a number.
– (OPTIONAL) To clear statistics for all VRRP groups configured, enter the keyword vrrp. Enter a number
from 1 to 255 as the
vrid.
– (OPTIONAL) To clear unknown source address (SA) drop counters when you configure the MAC learning
limit on the interface, enter the keywords learning-limit.
When you enter this command, confirm that you want FTOS to clear the interface counters for that interface.
Example of the clear counters Command
FTOS#clear counters gi 0/0
Clear counters on GigabitEthernet 0/0 [confirm]
FTOS#
391