Reference Guide

The MSDP Sample Configurations show the OSPF-BGP configuration used in this chapter for MSDP. Also, refer to
Open Shortest Path First (OSPFv2) and Border Gateway Protocol IPv4 (BGPv4).
2. Configure PIM-SM within each EGP routing domain.
Refer to the following figures.
The MSDP Sample Configurations show the PIM-SM configuration in this chapter for MSDP. Also, refer to PIM
Sparse-Mode (PIM-SM).
3. Enable MSDP.
4. Peer the RPs in each routing domain with each other. Refer to Enable MSDP.
Related Configuration Tasks
The following lists related MSDP configuration tasks.
• Enable MSDP
• Manage the Source-Active Cache
• Accept Source-Active Messages that Fail the RFP Check
• Specifying Source-Active Messages
• Limiting the Source-Active Cache
• Preventing MSDP from Caching a Local Source
• Preventing MSDP from Caching a Remote Source
• Preventing MSDP from Advertising a Local Source
• Terminating a Peership
• Clearing Peer Statistics
• Debugging MSDP
• MSDP with Anycast RP
• MSDP Sample Configurations
517