Reference Guide

•
show hardware stack-unit cpu data-plane statistics
•
show hardware stack-unit cpu party-bus statistics
•
show hardware stack-unit 0-11 drops unit 0-1 port 0-63
•
show hardware stack-unit 0-11 stack-port 48-51
•
show hardware stack-unit 0-11 unit 0-1 {counters | details | port-stats
[detail] | register | execute-shell-cmd | ipmc-replication | table-dump}
•
show hardware {layer2| layer3} {e.g. acl |in acl} stack-unit 0-11 port-set
0-1
•
show hardware layer3 qos stack-unit 0-7 port-set 0-1
•
show hardware ipv6 {e.g.-acl |in-acl} stack-unit 0-11 port-set 0-1
•
show hardware system-flow layer2 stack-unit 0-11 port-set 0-1 [counters]
•
clear hardware stack-unit 0-11 counters
•
clear hardware stack-unit 0-11 unit 0-1 counters
•
clear hardware stack-unit 0-11 cpu data-plane statistics
•
clear hardware stack-unit 0-11 cpu party-bus statistics
•
clear hardware stack-unit 0-11 stack-port 48-51
Displaying Drop Counters
To display drop counters, use the following commands.
• Identify which stack unit, port pipe, and port is experiencing internal drops.
show hardware stack-unit 0–11 drops [unit 0 [port 0–63]]
• Display drop counters.
show hardware stack-unit drops unit port
Example of the show hardware stack-unit Command to View Drop Counters Statistics
FTOS#show hardware stack-unit 0 drops
UNIT No: 0
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
UNIT No: 1
Total Ingress Drops :0
Total IngMac Drops :0
Total Mmu Drops :0
Total EgMac Drops :0
Total Egress Drops :0
FTOS#show hardware stack-unit 0 drops unit 0
Port# :Ingress Drops :IngMac Drops :Total Mmu Drops :EgMac Drops :Egress
Drops
1 0 0 0 0 0
2 0 0 0 0 0
3 0 0 0 0 0
4 0 0 0 0 0
5 0 0 0 0 0
6 0 0 0 0 0
7 0 0 0 0 0
8 0 0 0 0 0
FTOS#show hardware stack-unit 0 drops unit 0 port 1
--- Ingress Drops ---
Ingress Drops : 30
IBP CBP Full Drops : 0
PortSTPnotFwd Drops : 0
910