Users Guide
Field Description
Admin mode ETS mode: on or o.
Admin Parameters ETS conguration on local port, including priority groups, 
assigned dot1p priorities, and bandwidth allocation.
Remote Parameters ETS conguration on remote peer port, including Admin mode 
(enabled if a valid TLV was received or disabled), priority groups, 
assigned dot1p priorities, and bandwidth allocation. If the ETS 
Admin mode is enabled on the remote port for DCBx exchange, 
the Willing bit received in ETS TLVs from the remote peer is 
included.
Local Parameters ETS conguration on local port, including Admin mode (enabled 
when a valid TLV is received from a peer), priority groups, 
assigned dot1p priorities, and bandwidth allocation.
Operational status (local port) Port state for current operational ETS conguration:
• Init: Local ETS conguration parameters were exchanged 
with peer.
• Recommend: Remote ETS conguration parameters were 
received from peer.
• Internally propagated: ETS conguration parameters were 
received from conguration source.
ETS DCBx Oper status Operational status of ETS conguration on local port: match or 
mismatch.
State Machine Type Type of state machine used for DCBx exchanges of ETS 
parameters:
• Feature: for legacy DCBx versions
• Asymmetric: for an IEEE version
Conf TLV Tx Status Status of ETS Conguration TLV advertisements: enabled or 
disabled.
ETS TLV Statistic: Input Conf TLV pkts Number of ETS Conguration TLVs received.
ETS TLV Statistic: Output Conf TLV pkts Number of ETS Conguration TLVs transmitted.
ETS TLV Statistic: Error Conf TLV pkts Number of ETS Error Conguration TLVs received.
The following example shows the show stack-unit all stack-ports all pfc details command.
Dell(conf)# show stack-unit all stack-ports all pfc details
stack unit 0 stack-port all
 Admin mode is On
 Admin is enabled, Priority list is 4-5
 Local is enabled, Priority list is 4-5
 Link Delay 45556 pause quantum
 0 Pause Tx pkts, 0 Pause Rx pkts
stack unit 1 stack-port all
 Admin mode is On
 Admin is enabled, Priority list is 4-5
 Local is enabled, Priority list is 4-5
 Link Delay 45556 pause quantum
 0 Pause Tx pkts, 0 Pause Rx pkts
The following example shows the show stack-unit all stack-ports all ets details command.
Dell(conf)# show stack-unit all stack-ports all ets details
Stack unit 0 stack port all
274
Data Center Bridging (DCB)










