Users Guide

5. Enable FIP snooping on all VLANs or on a specied VLAN.
CONFIGURATION mode or VLAN INTERFACE mode.
fip-snooping enable
6. Congure the port for bridge-to-FCF links.
INTERFACE mode or CONFIGURATION mode
fip-snooping port-mode fcf
NOTE: To disable the FCoE transit feature or FIP snooping on VLANs, use the no version of a command; for example, no
feature fip-snooping or no fip-snooping enable.
Displaying FIP Snooping Information
Use the following show commands to display information on FIP snooping, .
Table 24. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface vlan
vlan-id]
Displays information on FIP-snooped sessions on all VLANs or a
specied VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE
MAC address and FCoE session ID number (FC-ID), worldwide
node name (WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and congured FC-MAP
values.
show fip-snooping enode [enode-mac-address]
Displays information on the ENodes in FIP-snooped sessions,
including the ENode interface and MAC address, FCF MAC
address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped sessions,
including the FCF interface and MAC address, FCF interface,
VLAN ID, FC-MAP value, FKA advertisement period, and
number of ENodes connected.
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-address
| fcf-mac-address}
Clears FIP snooping information on a VLAN for a specied FCoE
MAC address, ENode MAC address, or FCF MAC address, and
removes the corresponding ACLs generated by FIP snooping.
show fip-snooping statistics [interface vlan
vlan-id| interface port-type port/slot |
interface port-channel port-channel-number]
Displays statistics on the FIP packets snooped on all interfaces,
including VLANs, physical ports, and port channels.
clear fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot |
interface port-channel port-channel-number]
Clears the statistics on the FIP packets snooped on all VLANs, a
specied VLAN, or a specied port interface.
show fip-snooping system
Displays information on the status of FIP snooping on the switch
(enabled or disabled), including the number of FCoE VLANs,
FCFs, ENodes, and currently active sessions.
show fip-snooping vlan
Displays information on the FCoE VLANs on which FIP snooping
is enabled.
Examples of the show fip-snooping Commands
The following example shows the show fip-snooping sessions command.
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
312
FCoE Transit