Users Guide
! Startup-config last updated at Tue Mar 11 12:11:00 2014 by default
!
boot system stack-unit 1 primary system: B:
boot system stack-unit 1 secondary tftp://10.16.127.35/dt-maa-s4810-2
boot system stack-unit 1 default tftp://10.16.127.35/dt-maa-s4810-2
boot system gateway 10.16.130.254
!
Page 57 - Under Managing the File System, the word external Flash must be removed
Page 57 - The output of show file-systems must be modified as follows.
Dell#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
2056916992 2056540160 FAT32 USERFLASH rw flash:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
Dell#
Managing the File System
The Dell Networking system can use the internal Flash, external Flash, or remote devices to store les.
The system stores les on the internal Flash by default but can be congured to store les elsewhere.
To view le system information, use the following command.
• View information about each le system.
EXEC Privilege mode
show file-systems
The output of the show file-systems command in the following example shows the total capacity, amount of free memory, le
structure, media type, read/write privileges for each storage device in use.
Dell#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
520962048 213778432 dosFs2.0 USERFLASH rw flash:
127772672 21936128 dosFs2.0 USERFLASH rw slot0:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
You can change the default le system so that le management commands apply to a particular device or memory.
To change the default directory, use the following command.
• Change the default directory.
EXEC Privilege mode
cd directory
Enabling Software Features on Devices Using a Command Option
This capability to activate software applications or components on a device using a command is supported on the S4810, S4820T,
and S6000, platforms.
Starting with Release 9.4(0.0), you can enable or disable specic software functionalities or applications that need to run on a device
by using a command attribute in the CLI interface. This capability enables eective, streamlined management and administration of
applications and utilities that run on a device. You can employ this capability to perform an on-demand activation or turn-o of a
52
Getting Started