Users Guide

Table 87. SNMP Traps and OIDs
OID String OID Name Description
Receiving Power
.1.3.6.1.4.1.6027.3.10.1.2.5.1.6 chSysPortXfpRecvPower OID displays the receiving power of the
connected optics.
Transmitting power
.1.3.6.1.4.1.6027.3.10.1.2.5.1.8 chSysPortXfpTxPower OID displays the transmitting power of the
connected optics.
Temperature
.1.3.6.1.4.1.6027.3.10.1.2.5.1.7 chSysPortXfpRecvTemp OID displays the temperature of the
connected optics.
NOTE: These OIDs only generate if
you enable the enable optic-
info-update-interval is
enabled command.
Hardware MIB Buer Statistics
.1.3.6.1.4.1.6027.3.16.1.1.4 fpPacketBuerTable View the modular packet buers details
per stack unit and the mode of allocation.
.1.3.6.1.4.1.6027.3.16.1.1.5 fpStatsPerPortTable View the forwarding plane statistics
containing the packet buer usage per
port per stack unit.
.1.3.6.1.4.1.6027.3.16.1.1.6 fpStatsPerCOSTable View the forwarding plane statistics
containing the packet buer statistics per
COS per port.
Troubleshooting Packet Loss
The show hardware stack-unit command is intended primarily to troubleshoot packet loss.
To troubleshoot packet loss, use the following commands.
•
show hardware stack-unit cpu data-plane statistics
•
show hardware stack-unit cpu party-bus statistics
•
show hardware stack-unit stack-unit-number drops unit 0-1 port port-number
•
show hardware stack-unit stack-unit-number stack-port 48-51
•
show hardware stack-unit stack-unit-number unit 0-1 {counters | details | port-stats
[detail] | register | execute-shell-cmd | ipmc-replication | table-dump}
•
show hardware {layer2| layer3} {e.g. acl |in acl} stack-unit stack-unit-number port-set
0-1
•
show hardware layer3 qos stack-unit stack-unit-number port-set 0-1
•
show hardware ipv6 {e.g.-acl |in-acl} stack-unit stack-unit-number port-set-number
•
show hardware system-flow layer2 stack-unit stack-unit-number port-set—number [counters]
•
show hardware drops interface [range] interface
•
show hardware stack-unit <id> buffer-stats-snapshot unit <id> resource x
•
show hardware buffer inteface interface{priority-group { id | all } | queue { id| all} ]
buffer-info
•
show hardware buffer-stats-snapshot resource interface interface{priority-group { id |
all } | queue { ucast{
id | all}{ mcast {id | all} | all}
•
show hardware drops interface interface
974
S-Series Debugging and Diagnostics