Reference Guide

redistribute
Redistribute into OSPFv3.
S4820T
Syntax
redistribute {bgp as number}{connected | static}[metric metric-
value | metric-type type-value] [route-map map-name] [tag tag-
value]
To disable redistribution, use the no redistribute {connected | static}
command.
Parameters
bgp as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically
connected interfaces.
static
Enter the keyword static to redistribute manually configured
routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then the OSPFv3
link state type of 1 or 2 for default routes. The values are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an
established route map. If the route map is not configured, the default
is
deny (to drop all routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
1014