Reference Guide

show monitor session
Display the monitor information of a particular session or all sessions.
S4820T
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session
command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from
0 to 65535.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Example
FTOS#show monitor session 11
SessionID Source Destination Direction Mode
--------- ------ ------------- --------- -------
11 Gi 10/0 Gi 10/47 rx interface
Related
Commands
monitor session — creates a session for monitoring.
1066