Reference Guide

BPDU sent 1579, received 0
The port is in the Edge port mode
Example (EDS/
LBK)
FTOS#show spanning-tree pvst vlan 2 interface gigabitethernet
1/0
GigabitEthernet 1/0 of VLAN 2 is LBK_INC discarding
Edge port:no (default) port guard :none (default)
Link type: point-to-point (auto) bpdu filter:disable (default)
Bpdu guard :disable (default)
Bpdus sent 152, received 27562
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
-----------------------------------------------------------
Gi 1/0 128.1223 128 20000 EDS 0 32768 0001.e800.a12b 128.1223
Example (EDS/
PVID)
FTOS#show spanning-tree pvst vlan 2 interface gigabitethernet
1/0
GigabitEthernet 1/0 of VLAN 2 is PVID_INC discarding
Edge port:no (default) port guard :none (default)
Link type: point-to-point (auto) bpdu filter:disable (default)
Bpdu guard :disable (default)
Bpdus sent 1, received 0
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
---------------------------------------------------------
Gi 1/0 128.1223 128 20000 EDS 0 32768 0001.e800.a12b 128.1223
Example (Guard)
FTOS#show spanning-tree pvst vlan 5 guard
Interface
Name Instance Sts Guard type
-----------------------------------
Gi 0/1 5 INCON(Root) Rootguard
Gi 0/2 5 FWD Loopguard
Gi 0/3 5 EDS(Shut) Bpduguard
Related
Commands
spanning-tree pvst — configure PVST+ on an interface.
spanning-tree pvst
Configure a PVST+ interface with one of these settings: edge port with optional bridge port data unit (BPDU) guard, port
disablement if an error condition occurs, port priority or cost for a VLAN range, loop guard, or root guard.
S4820T
Syntax
spanning-tree pvst {edge-port [bpduguard [shutdown-on-
violation]] | err-disable | vlan vlan-range {cost number |
priority value} | loopguard | rootguard}
1083