Reference Guide

The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for the DSCP Marking option.
pre-Version
7.4.1.0
Introduced.
Usage
Information
To access this command, enter the class-map command. After the class map is identified,
you can configure the match criteria.
Related
Commands
class-map — identifies the class map.
match mac dot1p
Configure a match criterion for a class map based on a dot1p value.
S4820T
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list Enter a dot1p value. The range is from 0 to 7.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for the DSCP Marking option.
pre-Version
7.4.1.0
Introduced.
Usage
Information
To access this command, enter the class-map command. After the class map is identified,
you can configure the match criteria.
Related
Commands
class-map — identifies the class map.
1105