Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1101

match mac vlan

Configure a match criterion for a class map based on VLAN ID.

S4820T

Syntax

match mac vlan number

Parameters

number

Enter the VLAN ID. The range is from 1 to 4094.

Defaults none

Command Modes CLASS-MAP

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.2.1.0 Introduced.

Usage

Information

To access this command, enter the class-map command. You can match against only one

VLAN ID.

Commands

class-map — identifies the class map.

policy-aggregate

Allow an aggregate method of configuring per-port QoS via policy maps. An aggregate QoS policy is part of the policy

map (input/output) applied on an interface.

S4820T

Syntax

policy-aggregate qos-policy-name

To remove a policy aggregate configuration, use the no policy-aggregate qos-

policy-name

command.

Parameters

qos-policy-name

Enter the name of the policy map in character format (32 characters

maximum).