Reference Guide

aaa authentication enable command usage:1
WORD option usage: 1
default option usage: 0
enable option usage: 0
line option usage: 0
none option usage: 0
radius option usage: 1
tacacs+ option usage: 0
show cpu-traffic-stats
View the CPU traffic statistics.
S4820T
Syntax
show cpu-traffic-stats [port number | all | cp ]
Parameters
port number (OPTIONAL) Enter the port number to display traffic statistics on that
port only. The range is from 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic statistics on all
the interfaces receiving traffic, sorted based on the traffic.
cp (OPTIONAL) Enter the keyword cp to display traffic statistics on the
specified CPU.
Defaults all
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series
Version 6.2.1.1 Introduced on the E-Series.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is
displayed first. All CPU and port information is displayed unless a specific port or CPU is
specified. Traffic information is displayed for router ports only; not for management interfaces.
The traffic statistics are collected only after the debug cpu-traffic-stats command is
executed; not from the system bootup.
111