Reference Guide

Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
The default burst size is 100Kb. If a different value is required, you must configure the burst size
to the required value.
Related
Commands
rate police — specifies traffic policing on the selected interface.
qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of the designated policy.
S4820T
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). Make the following value a multiple of 64. The range is
from 0 to 40000000. The default granularity is Megabits per second
(Mbps).
rate Enter the outgoing rate in multiples of 10Mbps. The range is from 10 to
10000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 10000.
The default is 50.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
1114