Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1111

Parameters

class-name

(Optional) Enter the name of a configured class map.

Defaults none

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

pre-Version

6.1.1.1

Introduced on the E-Series.

Example

FTOS#show qos class-map

Class-map match-any CM

Match ip access-group ACL

Commands

class-map — identifies the class map.

show qos dot1p-queue-mapping

Displays the dot1p priority to queue mapping on the switch.

S4820T

Syntax

show qos dot1p-queue-mapping

Defaults

• dot1p Priority: 0 1 2 3 4 5 6 7

• Queue: 0 0 0 1 2 3 3 3

Command Modes EXEC Privilege