Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1131

Field Description

Available CAM Indicates the free CAM space, in the partition, for the classification

rules.

NOTE: The CAM entries reserved for the default rules are not

included in the Available CAM column; free entries, from the

default rules space, cannot be used as a policy map for the

classification rules.

Estimated CAM per

Port

Indicates the number of free CAM entries required (for the

classification rules) to apply the input policy map on a single

interface.

NOTE: The CAM entries for the default rule are not included in

this column; a CAM entry for the default rule is always dedicated

to a port and is always available for that interface.

Status (Allowed

ports)

Indicates if the input policy map configuration on an interface

belonging to a linecard/port-pipe is successful — Allowed (n) — or

not successful — Exception. The allowed number (n) indicates the

number of ports in that port-pipe on which the Policy Map can be

applied successfully.

NOTE: In a Layer 2 Policy Map, IPv4/IPv6 rules are not allowed; therefore, the output

contains only L2ACL CAM partition entries.

Example

FTOS# test cam-usage service-policy input pmap_l2 linecard all

For a L2 Input Policy Map pmap_l2, the output must be as

follows,

Status

(Allowed ports)

0 0 L2ACL 500 200

Allowed (2)

0 1 L2ACL 100 200

Exception

1 0 L2ACL 1000 200

Allowed (5)

1 1 L2ACL 0 200

Exception

…

13 1 L2ACL 400 200

Allowed (2)

FTOS#

1131