Reference Guide

0 up up up up up up up
-- Power Supplies --
Unit Bay Status Type
--------------------------------------------
0 0 up AC
0 1 absent
-- Unit Environment Status --
Unit Status Temp Voltage
--------------------------------------------
0* online 50C ok
* Management Unit
-- Fan Status --
Unit Status Speed Fan1 Fan2 Fan3 Fan4 Fan5 Fan6 Serial Num
Version
---------------------------------------------
1 up high up up up up up up 1234 1
Example (fan)
FTOS#show environment fan
-- Fan Status --
---------------------------------------------
Unit TrayStatus Fan0 Fan1 Fan2 Fan3 Fan4 Fan5
0 up up up up up up up
Example (pem)
FTOS#show environment pem
-- Power Supplies --
Unit Bay Status Type
---------------------------------------------
0 0 up AC
0 1 absent
Example (stack-
unit)
FTOS#show environment stack-unit 0
-- Unit Environment Status --
Unit Status Temp Voltage
--------------------------------------------
0* online 49C ok
* Management Unit
show inventory
Display the S-Series or Z-Series switch type, components (including media), and FTOS version, including hardware
identification numbers and configured protocols.
S4820T
Syntax
show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media then the stack ID of the stack
member for which you want to display pluggable media inventory.
NOTE: This parameter is available but not supported in FTOS
version 8.3.11.4. Because stacking is not supported, if you use this
parameter, the output displays “Media not present or accessible”
(refer to the Usage Information section).
114