Reference Guide
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant
FTOS Command Line Reference Guide
.
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4 optics.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced this version of the command for S-Series. S-Series output
differs from E-Series.
Usage
Information
If there are no fiber ports in the unit, just the header under
show inventory media
displays. If
there are fiber ports but no optics inserted, the output displays
Media not present or
accessible
.
Example (S-
Series)
FTOS#show inventory
System Name : S50v
system Mode : 1.0
Software Version : 7.6.1.0a
Unit Type Serial Number Part Number Revision
--------------------------------------------------------------
0 *S50-01-GE-48T-V DL267050013 7590003600 B
0 S50-01-10GE-2C N/A N/A N/A
0 S50-PWR-AC N/A N/A N/A
0 S50-FAN N/A N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
Example (S-
Series)
S50V_7.7#show inventory media ?
<0-7> Slot number
| Pipe through a command
<cr>
S50V_7.7#show inventory media
Slot Port Type Media Serial Number F10Qualified
---------------------------------------------------
0 49 Media not present or accessible
0 50 XFP 10GBASE-SR C707XS0MD Yes
0 45 Media not present or accessible
0 46 Media not present or accessible
0 47 Media not present or accessible
0 48 Media not present or accessible
Example (Z9000)
ct-z9000-2#show inventory
System Type : Z9000
System Mode : 1.0
Software Version : 8.3.11.3b
115