Reference Guide

Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding state.
max-age — changes the wait time before RSTP refreshes the protocol configuration
information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the RSTP bridge.
S4820T
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age Enter a number of seconds the FTOS waits before refreshing
configuration information. The range is from 6 to 40 seconds. The
default is 20 seconds.
Defaults 20 seconds
Command Modes CONFIGURATION RSTP (conf-rstp)
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced on the E-Series.
Related
Commands
forward-delay — changes the wait time before RSTP transitions to the Forwarding state.
hello-time — changes the time interval between BPDUs.
1182