Reference Guide

method-list Enter a method list that you defined using the aaa accounting
exec or aaa accounting commands.
Defaults none
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
Related
Commands
aaa authorization commands — sets the parameters that restrict (or permit) a user’s access to
EXEC and CONFIGURATION level commands
aaa authorization exec — sets the parameters that restrict (or permit) a user’s access to EXEC
level commands.
aaa authorization commands
Set parameters that restrict (or permit) a user’s access to EXEC and CONFIGURATION level commands.
S4820T
Syntax
aaa authorization commands level {name | default} {local ||
tacacs+ || none}
Undo a configuration with the no aaa authorization commands level {name |
default} {local || tacacs+ || none}
command.
Parameters
commands level Enter the keyword commands then the command privilege level for
command level authorization.
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
1197