Reference Guide

Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Added support for RADIUS.
aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
S4820T
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no aaa
authorization config-commands
command.
Defaults Enabled when you configure aaa authorization commands command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information
By default, the aaa authorization commands command configures the system to
check both EXEC level and CONFIGURATION level commands. Use the command no aaa
authorization config-commands to enable only EXEC-level command checking.
1198