Reference Guide
Related
Commands
show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and
stack member port-pipe.
show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and
stack member port-pipe.
show hardware stack-unit — displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack
member and stack member port-pipe.
show interfaces stack-unit — displays information on all interfaces on a specific S-Series
stack member.
show processes memory (S-Series) — displays CPU usage information based on processes
running in an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
S4820T
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s
SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant
FTOS Command Line Reference Guide
.
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
121