Reference Guide

pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
The following describes the show user command shown in the following example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
FTOS#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
FTOS#
Related
Commands
username — enables a user.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before timing out.
S4820T
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Enter a number of seconds the software waits before logging you out.
The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Defaults See the defaults settings shown in Parameters .
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
1213