Reference Guide

0x00000000 0
FTOS#
show system
Display the status of all stack members or a specific member.
S4820T
Syntax
show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of
system information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member.
The unit ID range
for the S4820T is from 0 to 11.
stack-ports
status | topology
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the S4810 stack ports.
NOTE: This option applies to the S4820T only.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.4 The brief parameter no longer displays the current Reload mode.
To display Reload mode, use the
show reload-type command.
Modified the show system stack-unit command output to
support Piece Part ID (PPID).
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and
newer, while older boot codes display as "Present".
Version 7.7.1.0 Added Master Priority field.
Version 7.6.1.0 Introduced on the S-Series.
127