Reference Guide

snmp-server group
Configure a new SNMP group or a table that maps SNMP users to SNMP views.
S4820T
Syntax
snmp-server group [group_name {1 | 2c | 3 {auth | noauth |
priv}}] [read name] [write name] [notify name] [access access-
list-name | ipv6 access-list-name | access-list-name ipv6
access-list-name]]
To remove a specified group, use the no snmp-server group [group_name {v1 |
v2c | v3 {auth | noauth | priv}}] [read name] [write name]
[notify
name] [access access-list-name | ipv6 access-list-name
| access-list-name ipv6 access-list-name]] command.
Parameters
group_name Enter a text string (up to 20 characters long) as the name of the group.
The following groups are created for mapping to read/write
community/security-names (defaults):
• v1v2creadg — maps to a community/security-name with
ro permissions.
• 1v2cwriteg — maps to a community/security-name rw
permissions.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c, or 3):
• 1 is the least secure version.
• 3 is the most secure of the security modes.
• 2c allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1.
auth (OPTIONAL) Enter the keyword auth to specify authentication of a
packet without encryption.
noauth (OPTIONAL) Enter the keyword noauth to specify no authentication
of a packet.
priv (OPTIONAL) Enter the keyword priv to specify both authentication
and then scrambling of the packet.
read name (OPTIONAL) Enter the keyword read then a name (a string of up to
20 characters long) as the read view name. The default is GlobalView
and is assumed to be every object belonging to the internet (1.3.6.1)
OID space.
write name (OPTIONAL) Enter the keyword write then a name (a string of up to
20 characters long) as the write view name.
notify name (OPTIONAL) Enter the keyword notify then a name (a string of up
to 20 characters long) as the notify view name.
1283