Reference Guide

logging monitor
Specify which messages are logged to Telnet applications.
S4820T
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings,
notifications, informational, or debugging. The default
is
7 or debugging.
Defaults 7 or debugging
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
default logging monitor — returns the logging monitor parameters to the default setting.
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging buffer,
Syslog server, or terminal lines.
S4820T
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no logging
on
command.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
1302