Reference Guide

32M bytes of Boot-Flash memory.
1 48-port E/FE/GE (SB)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
------------------------------------ show clock
-------------------------------
12:03:01.695 UTC Wed Nov 21 2007
----------------------------------- show running-config
------------------------
Current Configuration ...
! Version E_MAIN4.7.5.414
! Last configuration change at Wed Nov 21 11:42:19 2007 by
default
!
service timestamps log datetime
!
hostname FTOS
!
enable password 7 xxxxxxxx
!
username admin password 7 xxxxxxxx
!
enable restricted 7 xxxxxxxx
!
Related
Commands
• show version — displays the FTOS version.
• show system (S-Series and Z-Series) — displays the current switch status.
• show environment (S-Series) — displays the system component status.
• show processes memory (S-Series) — displays the memory usage based on running
processes.
•
ssh-peer-stack-unit
Open an SSH connection to the peer RPM.
S4820T
Syntax
ssh-peer-stack-unit [-l username]
Parameters
-l username (OPTIONAL) Enter the keyword -l then your user name. The default
is the user name associated with the terminal.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
132