Reference Guide

Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0 Added the hard reset option.
Version 7.8.1.0 Augmented to run on the standby unit in order to reset the standby
unit directly.
Version 7.7.1.0 Introduced on the S-Series.
Usage
Information
Resetting the management unit is not allowed, and an error message displays if you try to do
so. Resetting is a soft reboot, including flushing the forwarding tables.
Starting with FTOS version 7.8.1.0, you can run this command directly on the stack standby unit
(standby master) to reset the standby. You cannot reset any other unit from the standby unit.
Example
Stack MAC : 00:01:e8:8b:1a:36
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
----------------------------------------------------
0 Management online S4810 S4810 8-3-12-1 64
1 Standby online S4810 S4810 8-3-12-1 64
2 Member online S4810 S4810 8-3-12-1 64
3 Member online S4810 S4810 8-3-12-1 64
4 Member online S4810 S4810 8-3-12-1 64
5 Member online S4810 S4810 8-3-12-1 64
6 Member not present
7 Member not present
8 Member not present
9 Member not present
10 Member not present
11 Member not present
Related
Commands
• reload – reboots FTOS.
• upgrade system stack-unit (S-Series stack member) – resets the designated S-Series
stack member.
show redundancy
Display the current redundancy configuration (status of automatic reboot configuration on stack management unit).
S4820T
Syntax
show redundancy
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
1320