Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1331

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

Version 6.5.1.0 Introduced on the E-Series.

storm-control broadcast (Configuration)

Configure the percentage of broadcast traffic allowed in the network.

S4820T

Syntax

storm-control broadcast [packets_per_second in]

To disable broadcast rate-limiting, use the no storm-control broadcast

[

packets_per_second in] command.

Parameters

packets_per_sec

ond

Enter the packets per second of broadcast traffic allowed into the

network. The range is from 0 to 33554368.

Defaults none

Command Modes CONFIGURATION (conf)