Reference Guide

Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The write memory command saves the running-configuration to the file labeled startup-
configuration. When using a LOCAL CONFIG FILE other than the startup-config not named
“startup-configuration” (for example, you used a specific file during the boot config
command), the running-config is not saved to that file; use the copy command to save any
running-configuration changes to that local file.
Related
Commands
save — saves configurations created in BOOT_USER mode (BLI).
140