Reference Guide

interval seconds Enter the keyword interval to specify the time interval to send
hello messages. The range is from 1 to 5 seconds. The default is 1
second.
Defaults 1 second
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Added support for IPv6.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
clear vlt statistics
Clear the statistics on VLT operations.
S4820T
Syntax
clear vlt statistics [arp | domain | igmp-snoop | mac |
multicast | ndp]
Parameters
domain Clear the VLT statistics for the domain.
multicast Display the VLT statistics for multicast.
mac Clear the VLT statistics for the MAC address.
arp Clear the VLT statistics for ARP.
igmp-snoop Clear the VLT statistics for IGMP snooping.
ndp Clear the VLT statistics for NDP.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Added multicast and ndp parameters.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
1402