Reference Guide

clear counters vrrp
Clear the counters maintained on VRRP operations.
S4820T
Syntax
clear counters vrrp [vrrp-id][ipv6]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range is
from 1 to 255.
ipv6 (OPTIONAL) Enter the keyword ipv6 to clear counters from the IPv6
VRRP group.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
debug vrrp
Allows you to enable debugging of VRRP.
S4820T
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters
interface Enter the following keywords and slot/port or number information
• For Port Channel interface types, enter the keywords port-
channel
then the number. The range is from 1 to 128.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
1421