Reference Guide

Line Beginning with Description
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements
received on the interface.
• Adv sent displays the number of VRRP advertisements sent
on the interface.
• Bad pkts rcvd displays the number of invalid packets
received on the interface.
Virtual MAC address Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the
interface is connected.
Tracking states... Displays information on the tracked interfaces or objects configured
for a VRRP group (track command), including:
• UP or DOWN state of the tracked interface or object (Up or
Dn).
• Interface type and slot/port or object number, description,
and time since the last change in the state of the tracked
object.
• Cost to be subtracted from the VRRP group priority if the
state of the tracked interface/object goes DOWN.
Example
FTOS#show vrrp ipv6
------------------
GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9
(local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
vrrp-ipv6-group
Assign an interface to a VRRP group.
S4820T
Syntax
vrrp-ipv6-group vrid
1436