Reference Guide

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
ping ethernet
Send a loopback message.
S4820T
Syntax
ping ethernet domain [name l level] ma-name ma-name remote
{dest-mep-id | mac-addr mac-address} source {src-mep-id | port
interface}
Parameters
name | level Enter the domain name or level.
ma-name ma-
name
Enter the keyword ma-name and then enter the maintenance
association name.
dest-mep-id Enter the MEP ID that is the target of the ping.
mac-addr mac-
address
Enter the keyword mac-addr and then enter the MAC address that
is the target of the ping.
src-mep-id Enter the MEP ID that originates the ping.
port interface Enter the keyword port and then enter the interface that originates
the ping.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
148