Reference Guide

Version 8.3.1.0 Introduced on the S-Series.
traceroute ethernet
Send a linktrace message to an MEP.
S4820T
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-
id mep-id | mac-addr mac-address}
Parameters
domain name |
level
Enter the keyword domain then the domain name or level.
ma-name ma-
name
Enter the keyword ma-name then the maintenance association
name.
mepid mep-id Enter the MEP ID that is the trace target.
mac-addr mac-
address
Enter the MAC address of the trace target.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
156