Reference Guide

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.12.0 Introduced on the S4810.

Version 8.3.11.1 Introduced on the Z9000.

Version 7.6.1.0 Introduced on the C-Series and S-Series.

Version 7.4.1.0 Introduced on the E-Series.

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network through the port. This

configuration is only takes effect in Multi-Auth mode.

S4820T

Syntax

dot1x max-supplicants number

Parameters

number

Enter the number of supplicants that can be authenticated on a single

port in Multi-Auth mode. The range is from 1 to 128. The default is 128.

Defaults 128 hosts can be authenticated on a single authenticator port.

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.12.0 Introduced on the S4810.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.4.1.0 Introduced on the C-Series and S-Series.

Commands

dot1x host-mode

165