Reference Guide

Parameters
access-list-name Enter the name of a configured MAC ACL, up to 140 characters.
interface
interface
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and then enter the slot/port
information.
• For a Port Channel interface, enter the keyword port-
channel and then enter a number. The C-Series and S-
Series range is from 1 to 128.
• For a SONET interface, enter the keyword sonet and then
enter the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.1.0 Introduced.
show mac accounting access-list
Display MAC access list configurations and counters (if configured).
S4820T
Syntax
show mac accounting access-list access-list-name interface
interface in | out
Parameters
access-list-name Enter the name of a configured MAC ACL, up to 140 characters.
interface
interface
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and then enter the slot/port
information.
216