Reference Guide

ip-prefix /nn (OPTIONAL) Specify an IP prefix in the network/length format. For
example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
le max-prefix-
length
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
bitmask number Enter the keyword bitmask then enter a bit mask number in dotted
decimal format.
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Added the bit mask option.
Usage
Information
If you do not use the ge or le options, only packets with an exact match to the prefix are
filtered.
Related
Commands
deny — configures a filter to drop packets.
permit — configures a filter to pass packets.
show config
Display the current PREFIX-LIST configurations.
S4820T
Syntax
show config
Command Modes PREFIX-LIST
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
234