Reference Guide

Parameters
map-name Enter a text string of up to 140 characters to name the route map for
easy identification.
permit (OPTIONAL) Enter the keyword permit to set the route map default
as permit. If you do not specify a keyword, the default is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map default as
deny.
sequence-
number
(OPTIONAL) Enter a number to identify the route map for editing and
sequencing with other route maps. You are prompted for a sequence
number if there are multiple instances of the route map. The range is
from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit action is the
default.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence number, all
route maps with the same map-name are deleted when you use the no route-map map-
name command.
Example
FTOS(conf)#route-map dempsey
FTOS(config-route-map)#
Related
Commands
show config — displays the current configuration.
248