Reference Guide

*>i 4.24.187.12/30 205.171.0.16 100 0 209 i
*>i 4.24.202.0/30 205.171.0.16 100 0 209 i
*>i 4.25.88.0/30 205.171.0.16 100 0 209 3561 3908
i
*>i 6.1.0.0/16 205.171.0.16 100 0 209 7170 1455
i
*>i 6.2.0.0/22 205.171.0.16 100 0 209 7170 1455
i
*>i 6.3.0.0/18 205.171.0.16 100 0 209 7170 1455
i
*>i 6.4.0.0/16 205.171.0.16 100 0 209 7170 1455
i
*>i 6.5.0.0/19 205.171.0.16 100 0 209 7170 1455
i
*>i 6.8.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.9.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.10.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.14.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.133.0.0/21 205.171.0.16 100 0 209 7170 1455
i
*>i 6.151.0.0/1 205.171.0.16 100 0 209 7170 1455
i
--More--
show ip bgp community-list
View routes that a specific community list affects.
S4820T
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name
[exact-match]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
community-list-
name
Enter the name of a configured IP community list (maximum 140
characters).
exact-match Enter the keyword for an exact match of the communities.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
345