Reference Guide

show ip bgp neighbors
Allows you to view the information BGP neighbors exchange.
S4820T
Syntax
show ip bgp [ipv4 unicast] neighbors [ip-address [advertised-
routes | dampened-routes | detail | flap-statistics | routes |
{received-routes [network [network-mask]]} | {denied-routes
[network [network-mask]]}]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view only BGP
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
received-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords received-routes then either
the network address (in dotted decimal format) or the network mask
(in slash prefix format) to view all information received from
neighbors.
NOTE: Configure the neighbor soft-reconfiguration
inbound command prior to viewing all the information received
from the neighbors.
denied-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords denied-routes then either the
network address (in dotted decimal format) or the network mask (in
slash prefix format) to view all information on routes denied via
neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
355