Reference Guide

6167 6167 6167 i
*>I 4.19.16.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.21.80.0/22 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.82.0/24 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.252.0/23 1.1.1.2 0 100 0 2914 701
6389 8063 19198 i
*>I 4.23.180.0/24 1.1.1.2 0 100 0 2914 3561
6128 30576 i
*>I 4.36.200.0/21 1.1.1.2 0 100 0 2914 14742
11854 14135 i
*>I 4.67.64.0/22 1.1.1.2 0 100 0 2914 11608
19281 i
*>I 4.78.32.0/21 1.1.1.2 0 100 0 2914 3491
29748 i
*>I 6.1.0.0/16 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.2.0.0/22 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.3.0.0/18 1.1.1.2 0 100 0 2914 701 668
i
show ip bgp summary
Allows you to view the status of all BGP connections.
S4820T
Syntax
show ip bgp [ipv4 unicast] summary
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp summary command shown in the following
example.
Field
Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
368