Reference Guide

Parameters
word Enter the name of the extended community list you want to view.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
Example
FTOS#show ip extcommunity-list test
ip extcommunity-list test
deny RT:1234:12
permit regexp 123
deny regexp 234
deny regexp 123
FTOS#
IPv6 BGP Commands
IPv6 border gateway protocol (IPv6 BGP) is supported on the S4820T platform.
BGP is an external gateway protocol that transmits interdomain routing information within and between Autonomous
Systems (AS). Basically, two routers (called neighbors or peers) exchange information including full routing tables and
periodically send messages to update those routing tables.
bgp soft-reconfig-backup
To avoid the peer from resending messages, use this command only when route-refresh is not negotiated.
S4820T
Syntax
bgp soft-reconfig-backup
To return to the default setting, use the no bgp soft-reconfig-backup command.
Defaults Off
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
379