Reference Guide

Term Explanation
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are
checked. Entering all shows the status for linecards and port-pipes
in the chassis.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that profile.
Estimated CAM per
Port
Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example (C-
Series)
FTOS#test cam-usage service-policy input LauraMapTest linecard all
Linecard|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM per
Port|Status
---------------------------------------------------------------
-------
2| 1|IPv4Flow |
232| 0|Allowed
2| 1|IPv6Flow |
0| 0|Allowed
4| 0|IPv4Flow |
232| 0|Allowed
4| 0|IPv6Flow |
0| 0|Allowed
FTOS#
FTOS#test cam-usage service-policy input LauraMapTest
linecard 4
port-set 0
Linecard|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM per
Port|Status
---------------------------------------------------------------
--------
4| 0| IPv4Flow|
232| 0|Allowed
4| 0| IPv6Flow|
0| 0|Allowed
FTOS#
FTOS#test cam-usage service-policy input LauraMapTest
linecard 2
port-set 1
Linecard|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM per
Port|Status
---------------------------------------------------------------
-------
2| 1| IPv4Flow|
232| 0|Allowed
2| 1| IPv6Flow|
0| 0|Allowed
FTOS#
Usage
Information
The following describes the test cam-usage command shown in the Example below.
391