Reference Guide

Example
(Queue2/Buffer-
Info)
FTOS(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 queue
2 buffer-info
----- Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware components.
show interfaces stack-unit — displays information on all interfaces on a specific S-Series
stack member.
show processes cpu (S-Series) — displays the CPU usage information based on the processes
running in an S-Series.
show system (S-Series and Z-Series) — displays the current status of all the stack members or
a specific member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S4820T
Syntax
show hardware system-flow layer2 stack-unit id port-set number
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display
which system flow entry the packet hits and what queue the packet
takes as it dumps the raw system flow tables.
stack-unit id Enter the keywords stack-unit to select a stack member ID. The
range is 0 to 11 for the S4820T.
port-set number
[counters]
Enter the keywords port-set with a port-pipe number.
The range is 0 to 0 for the S4820T.
(OPTIONAL) Enter the keyword counters to display hit counters for
the selected ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
455