Reference Guide

clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port interface.
S4820T
Syntax
clear fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/
slot
Enter the port-type and slot number of the FIP packet statistics to be
cleared.
port-
channelnumber
Enter the port channel number of the FIP packet statistics to be
cleared.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
debug fip snooping
Enable debugging on FIP snooping.
S4820T
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx]
Parameters
all Enter the keyword all to enable debugging on all the options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
tx Enter the keyword tx for packet transmit-specific debugging.
494