Reference Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Added the tx parameter.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
S4820T
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[
interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on which
to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode solicitation.
• virtual-link-instantiation — Enter the
keywords virtual-link-instantiation to enable
debugging on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-
discovery
to enable debugging on VLAN requests and
notifications.
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
495