Reference Guide

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.12.0 Introduced on the S4810.

Usage

Information

The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum

number of FIP snooping sessions supported per ENode server is 16.

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.

S4820T

Syntax

fip-snooping fc-map fc-map-value

To return the configured FM-MAP value to the default value, use the no fip-snooping

fc-map

command.

Parameters

fc-map-value

Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00

to 0EFCFF.

Defaults 0x0EFC00

Command Modes

• CONFIGURATION

• VLAN INTERFACE