Reference Guide

fip-snooping max-sessions-per-enodemac
Configure the maximum session limit per ENode MAC address.
S4820T
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the configured maximum sessions to the default value, use the no fip-snooping
max—sessions—per—enode—mac command.
Parameters
max-sessions-
value
Enter the maximum number of sessions allowed per ENode MAC
address. The range is from 1 to 64.
Defaults 32
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Introduced on the S4810 and S4820T.
fip-snooping port-mode fcf
Configure the port for bridge-to-FCF links.
S4820T
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf
command.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Usage
Information
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
498